We have a custom fit vehicle wiring for your vehicle. I used the Fit Guide on the website and found that the wiring kit you need for your 2008 Toyota Corolla is the Curt Custom Fit Vehicle Wiring, part # 55542. This kit will wire into the vehicle wiring and allow you to connect your trailer to your 2009 Toyota Corolla.
Yes, this custom fit wiring simply plugs into your factory wiring harness, it is a plug and play kit.
When connecting the trailer wiring to your vehicle it is always a... view full answer...
The part number for the Curt Custom Fit Vehicle Wiring for a 2014 Kia Sorento is # C56332.
Please see the product page for current prices on part # C56332.
I have included a video of the installation of Trailer Wiring Harness # C56332 for a 2014 Kia Sorento. view full answer...
Yes, the Curt T-Connector trailer wiring harness # C55565 will fit your 2006 Mitsubishi Outlander LS. I have included a link to the installation instructions for you as well. view full answer...
The Tow Ready Custom Fit Vehicle Wiring, item # 118323, for your 2007 Dodge Dakota will not cause any problems with the vehicle circuitry or cause any fault codes to display on the vehicle computer system as long as the connectors are installed properly.
Many of our customers have the same concern. All of the wiring harnesses we sell are tested by the manufacturer to work with the vehicles wiring and if we notice a problem with a harness we let them know immediately. We sell several of... view full answer...
I do have an option for you but the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part # 56042 only fits a 2008-2019 Toyota Highlander.
There is not a custom fit wiring harness yet for the 2020 Toyota Highlander. I recommend to use the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit part # 119250KIT which is not a custom fit option but is designed to clamp onto the factory wiring instead of cutting the wiring to install... view full answer...
Yes the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56200 is a custom fit item designed to fit your 2015 Jeep Wrangler Rubicon.
Check out the installation video I linked for you. view full answer...
This Tow Ready Custom Fit Vehicle Wiring # 118302 will work on your 2007 Honda Accord with LED taillights. You will not need a more expensive wiring kit for your vehicle. I attached installation instructions and an installation video for this product for you to check out also. view full answer...
There is not a custom fit at this time for your 2018 VW Tiguan with 4Motion. The custom fit harnesses from our manufacturers exclude the 4Motion. Because there is not a custom fit, your best option is to use the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This kit will not splice into your wires but instead will use the zero contact interface sensors to capture the needed signals. The module will draw power directly... view full answer...
The Tow Ready Custom Fit Vehicle Wiring, # 118344, is the wiring harness you will need if you do not have the factory tow package and your 2001 Ford Explorer XLT is a two door.
If your 2001 Ford Explorer XLT does not have the factory tow package and is a four door, then you will need the Tow Ready Custom Fit Vehicle Wiring, # 118345. This harness has a modulite converter that draws power for the trailer lights directly from the vehicles battery.
Both of the wiring harnesses connect the... view full answer...
On your 2006 Nissan Xterra without the tow package, you will need the Hopkins Custom Fit Vehicle Wiring, # 43605, which will connect to connectors located behind the taillights of your vehicle. This will have everything you will need to have a 4-Pole trailer connector on the rear of your vehicle.
The Hopkins wiring kit will include a length of wire that you will run from the powered converter to the front of the vehicle and attach to the vehicles positive side battery terminal with an... view full answer...
I spoke with my contact at Hopkins and he informed me that if you have the correct connector as shown in the pictures of the product page of the Hopkins Custom Fit Vehicle Wiring # 33855 then you can use the # 33855 for tail light wiring.
The Wiring # C59496would also work for you, but it would require that you splice into the tail light circuitry of your vehicle. For that reason I would recommend that you use a # 33855. view full answer...
We have the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56300. It is a custom fit wire harness that will work with your 2011 Honda CRV and will sync your lights together. view full answer...
The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118578 is the confirmed fit for the 2017 Toyota RAV4.
This custom-fit T-One connector plugs into your Toyota RAV4's wiring harness, which is located inside your trunk, behind the tail lights on both the driver's side and passenger's side. You will need to remove some interior trim or carpeting to access the harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to... view full answer...
That kit was not carried over to the 2011 HHR models but does fit the older ones like you noted.
We don't have any custom fit options for the 2011 models but the Roadmaster diode kit part # RM-15247 would be an excellent option. It splices into the taillight wiring of the vehicle to allow the tow vehicle the ability to control HHR's taillights. view full answer...
From two of our manufacturers, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Part # 76419 and the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Part # C77FR are the same for the hitches that are confirmed to fit for either the 2019 or 2021 Chevrolet Equinox.
For the wiring, you have a custom fit option in the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Part # 118759. This is the one to use if you have the "Premier" Equinox... view full answer...
We do have wiring kits, that will work with your 2012 Chevrolet Equinox, that do not require the vehicle have a tow package. However, the item you selected, Tow Ready T-One Vehicle Wiring Harness, part # 118264, will only fit the 2010-2012 Equinox models that are equipped with the factory tow package.
If your 2012 Chevrolet Equinox will not be equipped with a factory tow package, you could use either the Tow Ready Custom Fit Vehicle Wiring, # 118494, or the Curt Custom Fit Vehicle Wiring,... view full answer...
Trailer wiring harness # C56133 is a custom fit item that will only fit the 2011 to 2013 Dodge Durango. It is what can be considered as a plug and play harness. It just plugs in line with the vehicle tail light wiring and will need to be grounded to a bare metal surface. I have included a link to the instructions for you.
Curt also has wiring harness # C56162 that is a plug and play style harness only it requires a direct connection to the battery. This connection powers the trailer lights... view full answer...
For the correct wiring for your 2010 Chrysler Sebring, you would need Draw-Tite Custom Fit Vehicle Wiring, part # 118444, which plugs in-line with your tail light wiring connectors and connects to your battery via included fuse.
The item you selected, T-One Vehicle Wiring Harness, part # 118417 is designed to fit the 2006-2011 Chevrolet Impala.
The item you referred to, 4-Pole 60 Inch Long Vehicle End, part # 18002, will not work for on your Chrysler Sebring as it has a 3-Wire System... view full answer...
Go To Results